Important Abbrevations Used in Civil Engineering

The most common abbreviation used in civil engineering are as following:



  • A.A.S.H.T.O – American Association of state highway Transport Official.
  • A.C.I – American Concrete Institute.
  • A.R.E.A – American Railway Engineering Association.
  • A.B – Anchor Bolt Or Asbestos Board.
  • AC – Asphalt Concrete.
  • A.S.C – Allowable Stress of concrete.
  • A.S.T.M – American society for testing materials.
  • AC – Asbestos cement.
  • AE – Assistant Engineer.
  • APM – Assistant Project Manager.

 

  • B.M – Benchmark.
  • B.M – Bending moment.
  • BLK – Block Work.
  • BOQ – Bill Of Quantities.
  • BRW – Brick Retaining Wall.
  • BWK – Brick Work.
  • B.O.F – Bottom Of Foundation.
  • BHK – Bedroom, Hall, Kitchen.

 

  • C.I.Pipe – Cast iron pipe.
  • C.I.Sheet – Corrugated Iron sheet.
  • CL- Centre Line.
  • CRW – Concrete Retaining Wall.
  • CBW – Concrete Block Wall.
  • CIP – Cast In Place.
  • CMU – Concrete Masonry Unit.
  • CJ – Construction Joint.
  • CC – Centre To Centre.
  • CC – Cement concrete.
  • CE – Chief Engineer.
  • CP – Cement plaster.
  • CPM – Critical path method.
  • CS – Comparative statement.

 

  • D – Diameter.
  • DL – Development Length.
  • Dia – Diameter.
  • DIM – Dimension.
  • D.L – Dead load.
  • DPC – Damp proof course.
  • DPR – Daily Progress Report.
  • DRG – Drawings.
  • DWLS – Dowels.

 

  • EJ – Expansion Joint.
  • E.L – Environmental load.
  • EL – Existing Load.
  • EGL – Existing ground level.
  • ELCB – Earth Leak Circuit Breaker.



  • F.M – Fineness Modulus.
  • Ft – Foot Or Feet.
  • FL – Floor Level.
  • FGL – Formation ground level.
  • FOC – Factor Of Safety.

 

  • GL – Ground Level.
  • GL – Ground level.
  • GP – Ground plane.

 

  • HFL – Highest Flood Level.
  • HAC – High Alumina Cement.
  • HP – Horizontal plane.

 

  • IOM – Inter Office Memo.
  • ISI – Indian standard institute.

 

  • JE – Junior Engineer.

 

  • Kg – Kilogram.

 

  • L.L – Live load.
  • LW – Light Weight.
  • LWC – light Weight Concrete.
  • LC – Lime concrete.

 

  • M – Meter.
  • MM – Millimeter.
  • MB – Measurement book.
  • MCB – Miniature Circuit Breaker.
  • MEP – Mechanical Electrical Plumbing.
  • MFL – Maximum Flood Level.
  • MRC – Material Receipt Challan.
  • MT – Metric Tonnes.



  • N – Newton.
  • NCF – Neat cement finishing.

 

  • OPC – Ordinary Portland Cement.
  • OGL – Original ground level.
  • OSR – Open Source Reservation Area.

 

  • PC – Pile Cap.
  • PC – Precast Concrete.
  • PCC – Plain Cement Concrete.
  • PERT – Programme Evaluation and Review Technique.
  • PL – Plinth level.
  • PM – Project Manager.
  • PO – Purchase Order.
  • PPE – Personal Protective Equipment.
  • PPR – Poly Propylene Random.
  • PVC – Poly vinyl choloride .
  • PVC – Polyvinyl Chloride.
  • PSF – Pound Per Square Foot.
  • PSI – Pound Per Square Inch.
  • PWD – Public Works Department.

 

  • QC – Quality control.
  • QS – Quantity Surveyor.

 

  • RC – Reinforced Concrete.
  • R.B.W – Reinforced brick work.
  • RBC – Reinforced Brick concrete.
  • RCC – Reinforced Cement Concrete.
  • RMC – Ready Mixed Concrete concrete.
  • RL – Reduced level.

 

  • SCC – Self Compacting Concrete.
  • STP – Sewage Treatment Plant.
  • SRC – Sulphate Resisting Cement.
  • SWG – Standard wire gauge.

 

  • TB – Tie Beam.
  • TBM – Tunnel Boring Machine.
  • TDS – Total Dissolved Solids.
  • TOB – Top Of Beam.
  • TMT – Thermo Mechanical Treatment.
  • TOC – Top Of Concrete.
  • TOW – Top Of Wall.

 

  • U.S.C – Ultimate stress of concrete.
  • UPVC – Unplasticized Polyvinyl chloride.
  • USD – Ultimate strength design.

 

  • VP – Vertical plane.

 

  • W.C – Water closet.
  • WL – Working Level.
  • W.S.D – Working stress Design.
  • WO – Work Order.




These civil engineering abbrevations are very inportant. You will be needing these civil engineering abbrevations throughout your civil engineering.

Leave a Reply